Vitek Transcendent Series Manual Download

Page: 46 / 104

Transcendent NVR Series

settings. There are two record modes: auto mode and manual mode.

Auto Mode

Motion Record

: System will record on Motion activity only.

Sensor Record

System will record on Alarm Sensor trigger only.

Motion Sensor Record

System will record on either Motion activity or Alarm Sensor

trigger or both.

Always(24

ⅹ

7) Motion Record

System records all the time and on Motion activity

Always(24

ⅹ

7) Sensor Record

: System records all the time and on Alarm Sensor

trigger

Always(24

ⅹ

7) Motion Sensor Record

System records all the time and on

Motion activity and/or Alarm Sensor trigger.

Select one Auto mode to pop up the corresponding window. Set the video encode, resolution,
FPS, bitrate and audio of each camera and then click “OK” to save the settings.

Video Encode

: the available options will be H.265 and H.264 if the connected IP camera

Summary of Contents for Transcendent Series









































































































Search results

Summary of Contents for Transcendent Series

Reviews:

Related manuals for Transcendent Series

Brands by name

Popular brands

Vitek Transcendent Series, Manual

Search results

Summary of Contents for Transcendent Series

Reviews:

Related manuals for Transcendent Series

Brands by name

Popular brands