VIPA CP 240 RS232, Manual

Page: 140 / 148

Chapter 6 CP 240 - M-Bus Manual VIPA System 200V
6-14 HB97E - CP - Rev. 11/30
The example uses the following data blocks:
Addr. Name Type Comment
0.0 STRUCT
+0.0 Sendefach STRUCT Send data block
+0.0 Baudrate BYTE B8h=300, BBh=2400, BDh=9600
+1.0 OK / C-Feld BYTE E5h=OK / C field
+2.0 A-Feld BYTE A field
+3.0 CI-Feld BYTE CI field
+4.0 User-Data Byte 0 BYTE
...
+252.0 User-Data Byte 247 BYTE Transfer complete
+253.0 Reserve BYTE
+254.0 Anzahl WORD Transmitting length
+256.0 gesendet WORD Already sent data
+258.0 Byte_Zaehler WORD Transmitting length (internal)
+260.0 Kom_Ende BOOL Telegram transmitted completely
+260.1 LB BOOL Last block has been sent
+260.2 SL BOOL Still transmitting
+260.3 Fehl BOOL Error during transmission
+260.4 Senden_Start BOOL Start bit
+261.0 PAFE BYTE Parameterization error
=262.0 END_STRUCT
Addr. Name Type Comment
0.0 STRUCT
+0.0 Data ARRAY [0..100]
*1.0 Byte
+102.0 Anzahl WORD Amount of received data
+104.0 empfangen WORD Already received data
+106.0 Byte_Zaehler WORD Amount of received bytes (internal)
+108.0 Empf_laeuft BOOL Still receiving
+108.1 LB BOOL Last block has been received
+108.2 Fehl BOOL Error during reception
+108.3 Reserve BOOL
+108.4 Empfang fertig BOOL Reception ready
+109.0 PAFE BYTE Parameterization error
=110.0 END_STRUCT
Data blocks
DB10
SEND data block
DB11
RECEIVE data block