VIPA CP 240 RS232, Manual

Page: 104 / 148

Chapter 5 CP 240 - EnOcean Manual VIPA System 200V
5-10 HB97E - CP - Rev. 11/30
The example uses the following data blocks:
Addr. Label Type Comment
0.0 STRUCT
+0.0 Sendefach STRUCT Send data block
+0.0 RX_TX_Kennung BYTE 0B=RX/6B=TX
+1.0 ORG BYTE
+2.0 Datenbyte3 BYTE Data byte 3
+3.0 Datenbyte2 BYTE Data byte 2
+4.0 Datenbyte1 BYTE Data byte 1
+5.0 Datenbyte0 BYTE Data byte 0
+6.0 IDbyte2_3 WORD ID Byte 2 and 3
+8.0 IDbyte0_1 WORD ID Byte 0 and 1
+10.0 Status BYTE Status
=12.0 END_STRUCT
+12.0 Reserve BYTE
+13.0 SENDEN_LAEUFT BOOL Still transmitting
+13.1 LETZTER_BLOCK BOOL Last block has been sent
+13.2 FEHL_KOM BOOL Error during transmission
+13.3 ENDE_KOM BOOL Transfer complete
+14.0 PAFE BYTE Parameterization error byte of FC0
+15.0 Res00 BOOL
+15.1 Res01 BOOL
+15.2 Res02 BOOL
+15.3 Res03 BOOL
+15.4 Res04 BOOL
+15.5 Res05 BOOL
+15.6 Res06 BOOL
+15.7 Senden_start BOOL Telegram transmitted completely
+16.0 GESE WORD Already sent data
+18.0 ANZ_INT WORD Amount of sent data
+20.0 Reserve1 ARRAY[0..50]
*1.0 BYTE
=72.0 END_STRUCT
Data blocks
DB10
Send data block