Manual VIPA System 200V
Chapter 3 Project engineering
HB97E - CP - Rev. 11/30
3-15
1. data word of the data block of the partner station
Coordination flag
The coordination flag serves to coordinate sending data. The coordination
flag is set by the SEND order. As long as the flag is set, no other SEND
order may be released. With FFFFh the coordination flag is deactivated.
Indicator word
Information concerning the order commissioning may be accessed by the
indicator word. More may be found at "RK512 communication - Indicator
word ANZW".
At proper function, all bits of this bit memory byte are "0". At errors an error
code is entered. The error setting is self-acknowledging, i.e. after
elimination of the error cause, the byte is set back to "0" again. The
following errors may occur:
1 = Data block not present
2 = Data block too short
3 = Data block number outside valid range
These parameters are internally used. They serve the information
exchange between the handling blocks.
ZBDW
KOOR
ANZW
PAFE
ANZ, GESE,
KOPF_GESE,
ERSTER_BLOCK,
SENDEN_LAEUFT,
SENDEN_FERTIG,
LETZTER_BLOCK,
FEHLER
Summary of Contents for CP 240 RS232
