FCC ID: K6620285X20
IC ID: 511B-20285X20
VX-3R Operating Manual
or number.
9. Repeat steps 6 through 8 until you have completed the access code (“F(#)1101D”).
10. If you wish to attach an alpha/numeric name “Tag” to the Internet Memory, proceed to the next step;
otherwise press the PTT switch to save the settings and exit to normal operation.
11. Press the [V/M] key twice. The DTMF Memory register number blinks.
12. Press the [MODE] key momentarily (the “-ALPHA-” notation appear in the display for 2 seconds), then
press the [V/M] key momentarily to enable programming of the name tag.
13. Rotate the DIAL knob to select the first digit of the desired label.
14. Press the [V/M] key to move to the next character.
15. If you make a mistake, press the [BAND] key to back-space the cursor, then re-enter the correct letter,
number, or symbol.
16. Repeat steps 13 through 15 to program the remaining letters, numbers, or symbols of the desired label.
A total of six characters may be used in the creation of a label.
17. When you have programmed a label which is under 6 characters, press the [TXPO] key to confirm the
label.
18. Repeat steps 3 through 17 to store other access codes, if so desired.
19. Press the PTT switch to save the settings and exit to normal operation.
Operation (Accessing an FRG Node)
1. Press and hold in the [TXPO] key for one second to enter the Set mode again.
2. Rotate the DIAL knob to select Set Mode Item 39: INT MD.
Note: Do not forget to pull the DIAL knob to rotate the DIAL knob.
3. Press the [TXPO] key to enable adjustment of this Set Mode Item.
4. Rotate the DIAL knob to set this Set Mode Item to “FRG” (thus activating the “Other Internet Link
System” mode).
5. Press the PTT switch to save the new settings.
6. Press the [%] key momentarily to activate the Internet Connection feature. The “%” icon will appear in
the upper right corner of the display.
7. Rotate the DIAL knob while pressing the [%] key to select the Internet Memory register number (“F 0” -
“F63”) corresponding to the Internet link repeater to which you wish to establish an Internet link, then
press the PTT switch momentarily to lock in the selected access number.
8. Once the Internet Connection feature is activated per step 7 above, you may now press the [%] key,
while you are transmitting, to send out the selected DTMF string (to establish the link to the desired
Internet-link mode).
9. To return to the WIRES
TM
SRG mode, repeat steps 1 - 5 above, selecting “SRG” in step 4.
Vertex Standard Co., Ltd.
55
