FCC ID: K6620285X20
IC ID: 511B-20285X20
VX-3R Operating Manual
3. While the memory channel number is blinking, just press the [HM/RV] key. The frequency and other
data (if any) will now be stored in the special HOME channel register.
4. You may repeat this process on the other operating bands.
R.F. Says: The UHF HOME channel is the one used during “Emergency” operation. See page ?? for details
regarding this feature.
Default Home Channels
B
AND
F
REQUENCY
B
AND
F
REQUENCY
BC Band
0.540 MHz
VHF-TV Band
174.000 MHz
SW Band
1.800 MHz
Information Band 1
230.000 MHz
50 MHz Ham Band
30.000 MHz
430 MHz Ham Band
446.000 MHz
FM BC Band
59.000 MHz
VHF-TV Band
470.000 MHz
Air Band
108.000 MHz
Information Band 2
860.000 MHz
144 MHz Ham Band
146.520 MHz
–
–
Labeling Memories
You may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to aid in recollection of
the channel’s use (such as a club name, etc.). This is easily accomplished using the Set Mode.
1. Recall the memory channel on which you wish to append a label.
2. Press and hold in the [TXPO] key for one second to enter the Set mode.
3. Rotate the DIAL knob to select the Set Mode Item 52: MRNAME.
Note: Do not forget to pull the DIAL knob to rotate the DIAL knob.
4. Press the [TXPO] key momentarily to enable adjustment of this Set Mode Item.
5. Rotate the DIAL knob to select the first digit of the desired label.
6. Press the [V/M] key to move to the next character.
7. Repeat steps 5 and 6 to program the remaining letters, numbers, or symbols of the desired label. A
total of six characters may be used in the creation of a label.
8. If you make a mistake, press the [BAND] key to back-space the cursor, then re-enter the correct letter,
number, or symbol.
9. When you have completed the creation of the label, press the PTT switch to save the label and returns
to memory mode with alpha-numeric “Tag” (label) display.
R.F. Says: You may check the frequency of the “Tagged” memory channel temporarily by press and holding
the [MONI] key. Release the [MONI] key to return to “Tag” display.
To disable the alpha-numeric Tag (enabling the frequency display):
1. Set the VX-3R to the “MR” (Memory Recall) mode, and recall the memory channel on which you wish
to disable the alpha-numeric Tag.
Vertex Standard Co., Ltd.
30
