Veit SF26, Operating Instructions Manual

Page: 80 / 149

9.1.2 Warning messages
Warning message Cause Remedy
01 PLC battery, Attention data
loss
Attention: The error indicates that
there only is little capacity of the
PLC backup battery remaining.
Risk of data loss. Machine setup
data and machine counter data
are no longer saved. Please
replace battery immediately.
PLC backup battery is dead. Replace battery, see information
in section "Battery replacement on
touch panel PP65".
03 Error light barrier The signal of the light barrier for
hem detection was not available
during the reference run.
Check the arrangement of the
light barrier: The light beam of the
light barrier must be visible on the
reflector.
Check reflector for dirt.
If the beam is not interrupted, the
LED on the light barrier must be
on.
10 CPU temperature > 85°C Permissible CPU temperature
exceeded, CPU of touch panel
becomes too hot
Check the ventilation slots for
clogging.
Reduce the ambient temperature.
21 PPP - eMail Server (Report) Internet connection disturbed By service engineer
22 PPP - eMail Server (Data) Internet connection faulty By service engineer
23 PPP - GSM network not avail-
able
GSM network disturbed By service engineer
24 PPP - MODBUS-TCP faulty Internet router defective By service engineer
25 PPP - Mechanic Piece Counter
faulty
Piece counter defective Replace the piece counter
Remedy of faults/elimination of defects
Alarm messages on the touch screen > Warning messages
18.07.2017 Shirt finisher VEIT SF26 80