manualshive.com logo in svg

Veit SF26, Operating Instructions Manual

Share
Download
Veit SF26 Operating Instructions Manual Download Page 50

n

Operating mode:

Pressing the arrow buttons allows for selecting between dif-

ferent programs.

n

Service mode:

Pressing the arrow buttons moves the screen page up or

down.

Pressing the arrow buttons changes to another screen page.

Calling a program with predefined program parameters

n

Short press:

Activates the next program. When reaching P3, P1 will be acti-

vated when pressing the button the next time.

n

Button is orange:

The values set correspond to the indicated program.

n

Button is blue:

The values set do not correspond to the indicated program.

n

Long press (>3 s):

The current setpoints can be stored under P1 - P3.

CAUTION!

The program previously stored under this button

will be overwritten.

Daily counter

Displays the completed finishing cycles. A long press (>3 s) is used

to reset the counter.

Save button

Pressing the button saves the modifications.

Operating mode

Pressing the button changes to operating mode.

Service mode

Pressing the button changes to service mode.

Confirm

Pressing the button confirms the action.

Operation

Controls and indicators > Control panel

18.07.2017

Shirt finisher VEIT SF26

50

Summary of Contents for SF26






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands