manualshive.com logo in svg

Veit SF26, Operating Instructions Manual

Get your Veit SF26 operating instructions manual for free download at manualshive.com. This comprehensive manual covers every aspect of operating and maintaining your Veit SF26 product. With easy-to-follow instructions and detailed illustrations, this manual will ensure optimal performance and longevity of your machine.

Share
Download
background image

6.3.2  Compressed air supply connection

The SF26 shirt finisher is connected to a pneumatic supply.

WARNING!
Pneumatic energy

Pneumatic energy may lead to death or serious

injuries. Even when the power supply has been

disconnected, energy stored in the system may

cause hazardous movement, e.g. triggering of cat-

apult effects.
The pneumatic connection must be carried out by

a qualified person.
Service the pneumatic system according to the

maintenance schedule.

NOTICE!

Use clean compressed air which is free from oil

and condensate.

Compressed air quality requirements:

CAUTION!

Use clean air (quality class 3 according to DIN ISO

8573-1) or higher with the following properties:

Class

Particles

Water

Oil

 

Max.

particle

size in

µm

Max.

particle

density

in mg/m

3

Pressure

dew

point in

°C

Water

content

in mg/m

3

Residual

oil con-

tent in

mg/m

3

3

5

5

-20

880

1

Clean and condensate-free compressed air prevents machine

downtimes and increased maintenance costs.

Installation

Installation > Compressed air supply connection

18.07.2017

Shirt finisher VEIT SF26

36

Summary of Contents for SF26






















































































































































Reviews:

No comments

Related manuals for SF26

Brands by name

Popular brands

Load more brands