Veit SF26, Operating Instructions Manual

Page: 64 / 149

7.3.1.6.10 Screen calibration
In case the buttons on the screen do not respond correctly to your
entries, the screen must be calibrated.
Press the circle shown on the screen. The circle will appear subse-
quently in the screen corners and must be pressed in the centre.
The screen then switches to service.
The screen has been calibrated.
7.3.1.6.11 Pay per piece (PPP)
Tab. 13:
PPP setup
Daily eMail
Report (for
Client)
Yes
A daily report is created and sent.
No
A daily report is not created.
Receiver Entry
Enter the e-mail address of the recipient (e.g.
client).
Time to
send
Entry
Set the desired time for the report to be sent.
Fig. 23: Screen calibration
Fig. 24: PPP-Setup D (EN)
Operation
Controls and indicators > Control panel
18.07.2017 Shirt finisher VEIT SF26 64