Veit SF26, Operating Instructions Manual

Page: 22 / 149

3.4.2 Safety measures
(To be carried out by the operating company)
The operating company is responsible for:
n
Training their operating and maintenance personnel in the use
of the machine's safety devices
n
Monitoring their operating and maintenance personnel to
adhere to the safety measures
n
Ensuring that unauthorised persons (i.e. no operating or main-
tenance personnel) are prevented from entering the danger
zone of the machine.
The statutory minimum age for operating and maintenance per-
sonnel must be observed.
These operating instructions must be retained for future use.
The prescribed frequency of inspection and control measures must
be observed.
In these operating instructions, the operations to be carried out are
described in such a way that
n
An
instructed person
can understand the instructions given in
chapter OPERATION
n
An
authorised person
can understand the instructions given
in chapter MAINTENANCE
n
A
qualified person
can understand the instructions given in
chapters TRANSPORT, INSTALLATION, SETTING UP and
MAINTENANCE
In the REMEDY OF FAULTS/ELIMINATION OF DEFECTS chapter,
the responsible person/qualified person is specified depending on
the type of fault.
A person who has been introduced to the tasks assigned to
him/her and the possible dangers that can result from improper
behaviour, who has been appropriately trained and who has been
instructed in the necessary safety devices and safety measures.
A person who operates the machine on a regular basis and who
has been instructed by a qualified person from VEIT GmbH, partic-
ularly with regard to setting up and servicing the machine, unless
agreed otherwise in the purchase contract.
A person who, because of her/his education, knowledge and expe-
rience and their knowledge of relevant standards, has been author-
ised to carry out any operations and who is able to recognise any
possible dangers.
The definition follows EN 60204 ‑ 1:2006+A1:2009.
Instructed person
Authorised person
Qualified person
Safety
Built-in safety systems > Safety measures
18.07.2017 Shirt finisher VEIT SF26 22