Veit SF26, Operating Instructions Manual

Page: 140 / 149

13 Options
13.1 Residual moisture control
13.1.1 Function description of residual moisture control
The user can either select a drying time that can be set manually
or automatic detection of the garment drying degree (residual
moisture control).
Drying time that can be set manually (time control)
Drying time that is terminated automatically (residual moisture
control)
If residual moisture control is selected, manual setting of the drying
time depending on the type of garment can be omitted. Sensors
integrated in the device are used to determine the relevant residual
moisture of the garment. The finishing process is terminated fully
automatically if the device control system determines the shirt to be
dry (residual moisture control) or if the preset maximum time is
reached. On the SF26, the user can therefore use the advantages
of residual moisture control and time control in parallel. When set-
ting the maximum time, the user can determine the maximum
process time and, simultaneously, benefit from shorter process
times if the garment is dry earlier.
13.1.2 Residual moisture control operating mode
Manual drying time screen
Standard setting of the drying time by time preselection.
Fig. 66: Manual drying time screen
Options
Residual moisture control > Residual moisture control operating mode
18.07.2017 Shirt finisher VEIT SF26 140