Veit SF26, Operating Instructions Manual

Page: 32 / 149

6 Installation
NOTICE!
The installation described here only refers to the
series machine without options.
6.1 Setting up
The machine will be set up, assembled and installed by qualified
personnel of VEIT GmbH or by qualified personnel provided by the
customer. In case of subsequent deliveries, the subassemblies
must be disassembled or assembled by qualified personnel only.
n
Make sure that the statics of the building are designed to carry
the weight of the machine.
n
The machine has to be set up on an even surface.
n
The energy supply (electrical and compressed air connection)
must be available.
n
For machines without steam generator (DE), steam supply
connections and the condensate connection must be available.
n
Make sure that there is enough space around the machine to
carry out service and maintenance work.
NOTICE!
If the place of installation does not comply with the
intended use, rebuilding measures must be taken
to ensure a higher protection class (see the "Tech-
nical data" chapter).
Installation
Setting up
18.07.2017 Shirt finisher VEIT SF26 32