Veit SF26, Operating Instructions Manual

Page: 71 / 149

8.1 Cleaning
Remove oil and grease from the machine at regular intervals, in
particular before carrying out maintenance and repair work.
CAUTION!
Do not use the following:
– Chlorinated hydrocarbon, e.g. PER or TRI
– Inflammable, easily gasifying or caustic liquids
Do not clean the machine with compressed air or a
steam or water jet under any circumstances . Vio-
lations of the above instructions may lead to mal-
functions of the machine, in particular with regard
to the safety functions. This might result in a
machine damage or injuries.
Clean the machine using a lint-free cloth.
8.2 Maintenance and inspection table
Inspection and maintenance schedule
Interval
Part to be inspected Work to be carried out Remarks
8 hrs Safety devices Function check See
Ä
Chapter 3
„Safety“ on page 15
40 hrs Compressed air mainte-
nance unit
Visual inspection Drain off water/oil, if nec-
essary; pressure range:
6 bar
Once a year, replace
clogged air filters.
Entire machine Clean Wipe using a clean, lint-
free cloth.
n
Main switch
n
Switch and switch
fasteners
Function check Check and replace, if
necessary.
Stretcher guide mecha-
nism
Visual inspection If any parts are worn,
they must be replaced
immediately to avoid
consequential damage.
Clean and remove mois-
ture
Wipe using a clean, lint-
free cloth.
Apply silicone spray
Fluff filter, left and right Visual inspection Wipe using a clean, lint-
free cloth.
Maintenance and cleaning
Maintenance and inspection table
18.07.2017 Shirt finisher VEIT SF26 71