91
Vanmaster, Unit 5 Stone House Road, Martland Park, Wigan WN5 0LE
www.vanmaster.net | [email protected]
Rear High Level Tail and Direction Indicator Lights.
Remove the two crosshead screws.
Remove fitting from caravan light cavity.
From back of light fitting turn and pull out bulb holder.
Replace/renew bulb with one of similar type.
Re-fit bulb holder and turn to lock to rear of light fitting.
Replace the 2-crosshead screws.
Replace light unit into caravan light cavity.
Note: Do not over tighten screws.
Side Skirt Lower Marker Lights.
Remove the 2-crosshead screws.
Pull light fitting away from skirt.
Twist off bulb holder from rear of fitting.
Replace/renew bulb holder making sure rubber sealing ring is in place.
Refit to side skirt cavity.
Replace 2 crosshead screws.
Note: Do not over tighten screws.
Interior Roof Lights. (12V)
Bulb type: J4 10w 12V JC
To Change Bulb:
Unscrew the three shade/cover retaining screws, being careful not to allow
shade/cover to drop or to lose plastic spacers on retaining screws. Pull out
the failed bulb(s) from its holder and replace with one of the same type
taking care not to touch bulb with fingers.
Check for operation.
To replace shade/cover, hold up same to line up with threaded holes on
lamp base (smooth outer rim to outside). Screw back the three retaining
screws with plastic spacers in place.
Tighten finger tight only.
