Urschel COMITROL 2100, Instruction Manual

Page: 87 / 166

9
SAFETY
Safety Signs
Figure 4 — Danger label, removed guard
Figure 5 — Danger and hazard alert labels
11667
MUST BE OPENED AND SERVICED BY
QUALIFIED ELECTRICIAN ONLY. INSTALL
TO MEET APPLICABLE CODES.
DEBE SER ABIERTO Y REPARADO POR UN
ELECTRICISTA CALIFICADO SOLAMENTE.
INSTALAR DE ACUERDO A LOS CODIGOS
CORRESPONDIENTES.
11665
MACHINE IS UNGUARDED.
REPLACE GUARD OR COVER.
LA MAQUINA ESTA SIN PROTECCION.
VOLVER A COLOCAR EL PROTECTOR
O CUBIERTA.
DANGER
PELIGRO
Danger labels (Figure 4) are visible
when a protective cover or guard has
been opened or removed. This label
warns you that the machine is
unguarded and must not be restarted
until all covers and guards are
replaced.
A danger label and a hazard alert
label (Figure 5) are placed on the
starter enclosure to warn you that this
is a source of electrical hazard. The
enclosure must be opened and serviced
by a qualified electrician only and the
installation must meet applicable codes.
The number on the hazard alert label
indicates the voltage requirements of
the machine.