Urschel COMITROL 2100, Instruction Manual

Page: 76 / 166

Addendum
Motor and Circuit Protective Devices, Current Transformer Windings
A.74
Manual Page Number Revision
Motor
Full Load
Amps (M1)
Current
Transformer
Windings
Primary
Secondary
Motor
Full Load
Amps (M1)
Current
Transformer
Windings
Primary
Secondary
34 3 +1 72 1 -8
35 2 -9 73 1 -8
36 2 -8 74 1 -8
37 2 -8 75 1 -8
38 2 -7 76 1 -7
39 1 -7 77 1 -7
40 2 -6 78 1 -7
41 2 -5 79 1 -6
42 2 -5 80 1 -6
43 2 -4 81 1 -6
44 2 -4 82 1 -5
45 2 -3 83 1 -5
46 2 -2 84 1 -5
47 2 -2 85 1 -5
48 2 -1 86 1 -4
49 2 -1 87 1 -4
50 2 0 88 1 -4
51 2 +1 89 1 -3
52 2 +1 90 1 -3
53 2 +2 91 1 -3
54 2 +2 92 1 -2
55 2 +3 93 1 -2
56 2 +4 94 1 -2
57 2 +4 95 1 -2
58 2 +5 96 1 -1
59 2 +5 97 1 -1
60 2 +6 98 1 -1
61 2 +7 99 1 0
62 2 +7 100 1 0
63 2 +8 101 1 0
64 2 +8 102 1 +1
65 2 +9 103 1 +1
66 1 -10 104 1 +1
67 1 -10 105 1 +1
68 1 -10 106 1 +2
69 1 -9 107 1 +2
70 1 -9 108 1 +2
71 1 -9 109 1 +3
Feed Screw and Agitator
Motor Fuses
See the information plate on the
motor and the schematic inside
the electrical enclosure.
Motor Full
Load Amps
(M2 & M3)
Fuse (FU1 & FU2)
Cube Type
Part No. Amps
2.50–3.99 21341 6
4.00–5.49 21339 10
5.50–7.99 21339 10
8.00–8.57 21325 15
8.58–10.00 21326 17-1/2
10.01–11.42 21327 20
11.43–14.49 21328 25
14.50–17.49 21329 30
17.50–20.00 21330 35
20.01–20.99 21331 40
21.00–22.85 21331 40
22.86–24.99 21332 45
Motor Full
Load Amps
Overload Relay
(OL2)
Part #
2.50–3.99 13680
4.00–5.49 13681
5.50–7.99 13682
8.00–8.57 13683
8.58–10.00 13683
10.01–11.42 13684
11.43–14.49 13684
14.50–17.49 13685
17.50–20.00 13686
20.01–20.99 13686
21.00–22.85 21244
22.86–24.99 21244
Agitator Motor Overload
Relays
See the information plate on the
motor and the schematic inside
the electrical enclosure.
The overload relay has a dial on
the front that must be set to the
motor full load amps from the
motor information plate.
70–83 Parts, Electrical Assembly , continued: repair parts
for previous electrical assembly and enclosure. See
Replacing the Current Transformer in this addendum for
more information on replacing the current transformer.