Unipulse F600AT, Operation Manual

Page: 7 / 81

CONTENTS
VI
4-5
．
Unit Setting ........................................................................................ 19
4-6
．
Tare Subtraction ................................................................................ 19
4-7
．
Digital Zero ......................................................................................... 20
4-7-1 ． DZ regulation value .................................................................. 20
5
．
COMPARISON SETTING ........................................................................... 21
Comparison mode setting,
Comparison inhibiting time/ Judging time/ Completion output time,
Availability of fall compensation/ Fall compensating coefficient/
Average count of fall compensation, Discharge control mode,
Completion signal output mode, Overweight/underweight comparison mode,
HI/LO limit comparison selection,
Near zero comparison selection/ Preset near zero value,
Tare setting selection/ Preset tare value
6
．
HOW TO SET THE FUNCTIONS ............................................................... 26
For HI/LO limit comparison
(when “HI-LO comp” is selected by comp mode sel.) ,
For final discharge – over weight/under weight comparison
(when “DIS.-O/U” is selected by comp mode sel.) ,
For final discharge – HI/LO limit comparison
(when “DIS.-H/L” is selected by comp mode sel.)
7
．
OPERATION SETTING .............................................................................. 28
Digital filter,Analog filter, Motion detect period/ Motion detect range,
Display frequency, Zero tracking period/ Zero tracking range, Indicate color,
Backlight lighting time/ Backlight bright-and-dark time, Display table selection,
HI/LO limit output selection, LOCK1/LOCK2
8
．
GRAPH SETTING ....................................................................................... 32
Graphic mode, Trigger level, X-axis (time) end point, Y-axis (load) start point,
Y-axis (load) end point, Drawing weight selection
9
．
SYSTEM ..................................................................................................... 34
Initialization, Password, Language,
〔
GROSS/NET
〕
key,
〔
DZ
〕
key,
〔
TARE
〕
key,
〔 Cursor ON/OFF 〕 key, 〔 START/STOP 〕 key, B4 terminal function selection
10
．
SEQUENCE SETTING ............................................................................. 36
Control mode, Adjust feeding/ Adjust feeding time,
Near zero confirmation at start time, Weight confirmation at start time,
AZ times, Judging times
11 ． TIMING CHART ........................................................................................ 38
11-1
．
Feed Weighing (In The Simple Comparison Mode) ......................... 38
11-2
．
Discharge Weighing (In The Simple Comparison Mode) ................. 39
11-3
．
Sequence Control ............................................................................ 40
11-3-1 ． Normal sequence ................................................................... 40
11-3-2 ． Sequence when the adjust feeding is ON .............................. 41
11-3-3 ． Sequence with no judgment ................................................... 41
11-3-4 ． About the stop signal ............................................................. 42
11-3-5 ． Relationship between AZ times, judging times, and
automatic fall compensation ................................................... 42