8.GRAPH SETTING
32
8. GRAPH SETTING
□
Graphic display screen
Graph is updated while operating on the ordinary display screen (a comparison, a hold, graph).
□
Cursor display screen
□
X-axis
“X-axis” is time axis setting. One screen is drawn between the instant of inputting the start and the
instant of the time set by the X-axis end point.
The number of drawing points is 200, and drawing is performed with the representative value at each of
the set time divided by the number of drawing points.
□
Y-axis
“Y-axis” is load axis setting. Drawing is performed from the value set by the Y-axis start point to the
value set by the Y-axis end point. (The number of drawing points is 100.)
X-axis (time axis)
Graphic display START/STOP
Indicated value display (At cursor ON time, the cursor point value is displayed.)
Y-axis (load axis)
Cursor ON/OFF key
When the cursor display is on and when the setting screen is open, the graph is
not upgraded.
The cursor moves to the directly-pressed
Cursor move buttons (The cursor moves on the X-axis.)
Cursor ON/OFF key
place on the graph.
Drawing area
100
Y
X
200
X-axis end point
Y-axis
Y-axis
0
end point
start point
