7.OPERATION SETTING
31
■
HI/LO limit output selection
Select the method of comparison output in the HI/LO limit comparison mode.
Alternatives:
［
NORMAL
］
［
COMPARATOR
］
□
Explanation of each alternative
［
NORMAL
］
［
COMPARATOR
］
■
LOCK1/LOCK2
This function protects set values and calibration from being changed by mistake.
LOCK1:
［
OFF
］
［
ON
］
LOCK2:
［
OFF
］
［
ON
］
* Please refer to "21. SETTING ITEM LIST" on page 65 for the setting that LOCK is done by
LOCK1 and LOCK2.
Signal name
Condition
HH
ON when the preset HI-HI limit
＜
weight value
HI
ON when the preset high limit
＜
weight value
GO
ON when HH, HI, LO and LL are all OFF
LO
ON when the weight value
＜
preset low limit
LL
ON when the weight value
＜
preset LO-LO limit
Signal name
Condition
HH
ON when the preset HI-HI limit
＜
weight value
HI
ON when the preset HI limit
＜
weight value
≦
preset HI-HI limit
GO
ON when the preset LO limit
≦
weight value
≦
preset HI limit
LO
ON when the preset LO-LO limit
≦
weight value
＜
preset LO limit
LL
ON when the weight value
＜
preset LO-LO limit
Preset lo-lo limit
Preset hi-hi limit
Preset low limit
Preset high limit
LL
GO
HH
LO
HI
……
This value is included.
……
This value is not included.
Preset LO-LO limit
Preset HI-HI limit
Preset LO limit
Preset HI limit
LL
GO
HH
LO
HI
……This value is included.
……This value is not included.
