RoHS-COMPLIANT PRODUCT
IV
RoHS-COMPLIANT PRODUCT
The parts and attachments (including the instruction manual, packaging box, etc.) used for this unit are
compliant with the RoHS Directive restricting the use of hazardous substances with regard to adverse
effects on the environment and human body.
What is RoHS?
It is an abbreviation for Restriction on Hazardous Substances, which is implemented by the European
Union (EU). The Directive restricts the use of six specific substances in electric and electronic
equipment handled within EU borders. The six substances are lead, mercury, cadmium, hexavalent
chromium, PBB (polybrominated biphenyls), and PBDE (polybrominated diphenyl ethers).
CAUTION
●
Tighten the screws for the signal input/output terminals at the specified torque.
If they are loose, shorts, fire or malfunctions may occur.
Tightening torque: 0.5N•m
●
For sensors, external inputs/outputs, RS-232C and options, use shielded cables.
●
The temporary overvoltage applied to the power should not exceed 1500V.
●
For turning on/off the power, be sure to keep intervals of 5 seconds or more.
●
After power-on, make sure to warm up the F600AT for at least 30 minutes or more before use.
●
If the F600AT is not used by the specified method, its protective performance may be
impaired.
●
Maintenance
- When performing maintenance, disconnect the power.
- Do not wipe with a wet rag, or with benzine, thinner, alcohol, etc. Doing so may cause
discoloration or deformation of the F600AT. In the case of heavy contamination, wipe off
the contamination with a cloth after dipping it into a diluted neutral detergent and wringing
it well, and then wipe with a soft, dry cloth.
●
When the F600AT is shipped, spacers made of corrugated cardboard are used as
cushioning materials.
Though it is factory-designed so that shocks can sufficiently be absorbed, breakage may
result if shocks are applied when the spacers are reused for transportation. If you send the
F600AT to us for repair, etc., take adequate measures against shocks by using polyurethane
materials, etc., separately.
●
If you dispose of the product, handle it as industrial waste.
●
Remove the lithium batteries used in the F600AT and make sure to dispose them according
to classification of waste collection.
This sign forewarns the presence of hazards
that could result in personnel injury or property damage
when incorrectly handled.
Caution on wiring
Caution during startup and maintenance
Caution during transportation
Caution during disposal
