13.AUTOMATIC PRINT
45
13. AUTOMATIC PRINT
The
F600AT can output an automatic print command to the printer or indicator connected to the SI/F.
The automatic print output timing varies depending on the setting.
13-1. In HI/LO Limit Comparison
The command is output at the ON edge of the stable status when the near zero signal is OFF. If the
automatic print is output, it can next be output after the near zero signal is once turned ON.
13-2. In The Discharge Mode; Simple Comparison Mode
The command is output at each ON edge of the completion signal. The value of the number of judging
times is ignored.
13-3. In The Discharge Mode; Sequence Mode
The command is output at the ON edge of the completion signal at the intervals of judging times. When
the number of judging times is 0, the automatic print is not output.
