4.CALIBRATION
20
4-7. Digital Zero
The gross weight value is zeroed by this function.
Alternatives:
［
RESET
］
［
NO
］
［
YES
］
:
Perform the digital zero.
:
Go back to the previous screen without executing digital zero.
: Reset the digital zero.
4-7-1. DZ regulation value
By setting the DZ regulation value, the alarm “ZALM” is displayed when operation is performed with
any gross weight value exceeding the range.
Setting range: 0000 to 9999
The displayed “ZALM” can be invalidated by the following method.
DZ reset
....................... Press
the
key
to reset the digital zero.
DZ re-execution
.......... Perform digital zero again within the regulation value range.
(Refer to "4-7. Digital Zero" on page 20.)
ＤＺ
* It operates it with the gross weight (GROSS) displayed.
YES
NO
RESET
MODE
Once
［
CALIBRATION
］
［
DZ REGULATION VAL
］
→
→
→
Once
→
RESET
