Troubleshooting and Maintenance
68
Document Number 206465-0001
User Guide
Chamber light bar replacement
1. Power down the printer.
2.
Locate the wiring harness leading away from the top of the light bar.
3.
Disconnect the light bar from the wiring harness by squeezing the wiring harness clip while pulling
down.
4.
Remove the light bar by removing the three attachment screws (top, middle, bottom) - use the 7/64 T-
handle wrench supplied in the Welcome Kit.
5.
Install a replacement light bar with the three attachment screws - do not overtighten the screws.
6.
Re-attach the wiring harness lead.
Summary of Contents for 180-00108 uPrint
Page 1: ...User Guide...
