Setup
30
Document Number 206465-0001
User Guide
Loading material to the head for the single material bay
1. Once the material carriers have been added to the material bays, press
Load...
next, press
Load
Both
.
The display will show
Loading Model
. After the model material has loaded to the head the
display will show
Loading Support
.
Figure 24: Loading material to the head
Note:
It can take up to 5 minutes for the printer to load the material
to the head.
2.
When the printer has finished loading support material to the head, press
Done...
the display will show
Wait for Part
or
Ready to Build
(if a part is in the queue) and will also show the amount of material
remaining on the model and support spools.
Adding material carriers to the dual material bays
Once material spools have been inserted into the carriers, you will need to add the carrier into the material
bay.
An instructional video can be viewed at
http://www.uPrintDimension.com/productinformation/customerinfo
1. From the display panel press
Material
, the display will show
Add/Remove.
Press
Material Load...
Press
Load Both
Summary of Contents for 180-00108 uPrint
Page 1: ...User Guide...
