Setup
32
Document Number 206465-0001
User Guide
Figure 27: Load selected
4.
After the selected material bays have been loaded to the head, the display will show
Preparing
and
the inactive model material bay, for example,
Preparing M2
. This will repeat for the inactive support
material bay. An asterisk will be placed next to the model and support material bays that are active.
Note:
It can take up to 5 minutes for the printer to load the material
to the head.
5.
When the material has been loaded to the head and the secondary material bays have been prepared,
press
Done...
the display will show
Wait for Part
or
Ready to Build
(if a part is in the queue) and will
also show the amount of material remaining in both material bays.
Figure 28: Press done when finished loading
Press
Load selected
Press
Done...
Summary of Contents for 180-00108 uPrint
Page 1: ...User Guide...