Troubleshooting and Maintenance
64
Document Number 206465-0001
User Guide
B. Use needle nose pliers to grasp the stainless steel shield of the tip.
C. Pull the tip shield toward you, then pull down to remove the tip from the heater block. Discard the
used tip. See
Figure 52
.
Figure 52: Remove the tips
D. Repeat for second tip if necessary.
Installing tips:
1. Place the tip shield on the tip. Be sure to install the proper tip. See
Figure 54
Figure 53: Identifying Tips
Pull tips down to
remove
Heater block
Support Tip
Model Tip
Left Side
Right Side
Summary of Contents for 180-00108 uPrint
Page 1: ...User Guide...
