µ-Dimension 180-00108 uPrint, User Manual

Page: 51 / 76

Troubleshooting and Maintenance 51
Document Number 206465-0001
User Guide
Material Error
Filament error
Remove the carrier and verify material is coming out of the
material guide.
Verify material pulls freely from the carrier.
Verify the material tubes are free of material.
Reload material.
Material Error
Filament blocked
Remove carrier and verify material pulls freely from carrier.
Verify the material tubes are free of material.
Reload material.
Material Error
Carrier invalid
Remove carrier and verify it is not empty.
Replace material spool.
Material Error
Filament broken
Remove the carrier and verify material is coming out of the
material guide.
Verify material pulls freely from the carrier.
Verify the material tubes are free of material.
Load Error
Filament blocked
Remove the carrier and verify material is coming out of the
material guide.
Verify the material pulls freely from the carrier.
Verify the material tubes are free of material.
Load Error
Purge failed
Remove the carrier and verify material is coming out of the
material guide.
Verify the material pulls freely from the carrier.
Verify the material tubes are free of material.
Check for and clear any excess material build up around
the tips.
Unload Error
Unload failed
Remove the carrier and verify the material tubes are free of
material.
Pausing
Press
Resume
.
Unload the material carriers and reinstall.
Problem or error
message on display
panel Solution