Setup
29
Document Number 206465-0001
User Guide
Adding material carriers to single material bay
Once material spools have been inserted into the carriers, you will need to add the carrier to the material
bay. If using dual material bays see
“Adding material carriers to the dual material bays” on page 30
An instructional video can be viewed at
http://www.uPrintDimension.com/productinformation/customerinfo
1. From the display panel press
Material
, the display will show
Add/Remove.
Figure 22: Adding carriers to the single material bay
2.
Add the model and support carriers to the material bay by inserting the carriers into the material bays
and pushing the carrier in until it latches. See
Figure 23
Figure 23: Insert carriers until they latch into place
Press
Material...
Insert model material
carrier
Insert support
material carrier
Summary of Contents for 180-00108 uPrint
Page 1: ...User Guide...
