Operation
48
Document Number 206465-0001
User Guide
Figure 39: Installing material retaining clips
11. Remove the material spool from the material carrier. See
Figure 40
.
Figure 40: Properly installed material retaining clips.
12. Place the material spool in the storage bag that came with the material carrier.
Note:
When not loaded in the printer, always store material spools
in the material carrier or the storage bag that came with the
carrier to prevent moisture absorption.
Auto power down
You can set the printer to automatically power down when it completes a build. This option will save energy
usage.
1. While the printer is building, press the
Auto Power Down
button.
2.
Turn the power switch to the off position.
The printer will display
Auto Power Down Mode
and the printer will power down as soon as the build is
complete.
Cancelling auto power down:
1. Turn the power switch back to the ON position.
Place clip here and push
down to lock in place
Summary of Contents for 180-00108 uPrint
Page 1: ...User Guide...
