Turbo Ace matrix, User Manual

Page: 8 / 74

Turbo Ace MATRIX
8

Advanced Multi-Counter-Rotating Rotor System designed for outstanding
stability & performance

Intelligent Programmable Flight Controller

Built-in Altitude Hold when throttle stick is released at 50% Throttle

Flight Controller with PC software interface

Dual Flight Mode: Sport Flying Mode & Auto Leveling Aerial Video Mode

Advanced Gyro with 6-DOF Motion & MEMS Sensor Technology

Full Compatibility with Standard 2.4GHz Systems

4 Dynamically Balanced C4234 Brushless Motors with outstanding power and
minimal vibration

4 Independent 40A ESCs for Outstanding Performance, Reliability & Ease of
Maintenance

Square Anti-Twist Mount Impact-Resistant Propellers with low noise operation

High Payload suited for professional camera & video equipment

Optional Single Axis Quadruple Anti-Shock Camera Mount (available)

Optional High Capacity 8000mAh Batteries for extended flight (available)

Optional FPV Integration (available)

Optional Sports Mode for faster flight capability
1.5 Specifications
Three models: MATRIX Lite, MATRIX Silver, and MATRIX Black

Dimensions including propellers: 1000 mm × 392 mm × 135 mm

Motor: 4 x 42mm Outrunner Brushless Motors

ESC: 4 x 40A Electronic Speed Controllers

Propellers: 2 x CW and 2 x CCW, 15 inches carbon

Receiver & Transmitter Requirements: 2.4GHz 6 to 14 Channel RX/TX Pair

Standard Battery: LiPo 6S (22.2v) 5300mAh 20C 1P. Flight time 15 min

Optional Battery: LiPo 6S (22.2v) 8000mAh 20C 1P. Flight time 25 min

Weight Without Battery & Camera mount:3.5 lbs

Maximum Payload: 3.5 lbs. For proper operation and stability please limit the
payload to 2.5 lbs.

Wind Tolerance: Class 5
1.6 Flight Controller Specifications
Supported Multi-rotor Quad-rotor I4, X4 / Hex-rotor I6, X6, IY6, Y6
Supported ESC output 400Hz refresh frequency
Recommended Transmitter PCM or 2.4GHz with a minimum of 4 channels