Turbo Ace MATRIX
22
Figure 4.2-1
NAZA Assistant Software Program Screenshot
(1)
RECEIVER TYPE: Please choose “
TRADITION
” for Walkera or Spektrum
or Futaba receiver.
(2)
CUT OFF TYPES: Default setting from WOW is “IMMEDIATELY”.
(3)
COMMAND STICKS CALIBRATION: Click
START
to begin the
calibration process. Please make sure to move both sticks to their end points.
This means you are moving both sticks all the way up, down, left and right.
(Note: If a transmitter stick is moved left or down, one of the on-screen sliders
will move to the left. If a transmitter stick is moved right or up, one of the
on-screen sliders will move to the right. If slider is moved at the opposite
direction, click the NORM or REV to reverse the direction of the slider
movement)
Throttle/Yaw Stick controls “T” (Throttle): Stick down and “T” slides left
(reduce Power) & stick up and “T” slides right (increase Power).
Throttle/Yaw Stick controls “R” (Rudder): Stick left and “R” slides left (nose to
the left) & stick right and “R” slides right (nose to the right).
