Turbo Ace MATRIX
40
4.4 Receiver, Flight Controller & Auto-stabilization Setup
FIGURE
4.4
(1)
Connect Channel #T wire from the flight controller to the THROTTLE
channel of the receiver. Watch for polarity.
(2)
Connect Channel #E wire from the flight controller to the ELEV channel of
the receiver.
(3)
Connect Channel #A wire from the flight controller to the AILE channel of the
receiver.
(4)
Connect Channel #R wire from the flight controller to the RUDDER channel
of the receiver.
(5)
Connect Channel #U wire from the flight controller to the AUX 1 channel of
the receiver.
(6)
Connect Gyrox Brushless gimbal tilt control cable to the AUX 3 channel of
the receiver.
(7)
Connect Channel #X2 wire from the flight controller to the GEAR channel of
the receiver.
(8)
Connect Channel #X3 wire from the flight controller to the LED Versatile Unit
(PMU).
