Turbo Ace MATRIX
49
(5)
Connect the provided Programming USB Cable from your PC computer’s
USB port (XP or WIN7 or WIN8) to the Micro USB port on the MATRIX
communication port (on the LED side panel of the MATRIX). (If the
computer does not recognize the USB, the USB driver is located in the
provided 8GB USB flash drive)
(6)
Double click on the NAZAInstaller.exe located in the provided 8GB USB
flash drive and install the NAZA ASSISTANT SOFTWARE.
(7)
Double click on the application file named NAZA ASSISTANT
SOFTWARE. Wait for the program to start up.
(8)
Click
MOUNTING
Use to input the distance between GPS and Main Flight
Controller.
(9)
Click
MOTOR MIXER
MIXER TYPE: Please select
Quad-rotor X
and remember to click WRITE
after you update any settings (WRITE is #7 on top of FIGURE 4.2)
(10)
Click
TX CALI
Figure 4.2-1
NAZA Assistant Software Program Screenshot
(11)
RECEIVER TYPE: Please choose “
TRADITION
” for Walkera or
Spektrum or Futaba receiver.
(12)
CUT OFF TYPES: Default setting from WOW is “IMMEDIATELY”.
