Using a mobile telephone
Mobile telephone cannot be detected
l
If the mobile telephone is connected to and is being used by another device, the mobile telephone
will be undetectable even if you search for it.
Cannot connect to mobile telephone
l
If the mobile telephone is connected to and is being used by another device, no other device will
be able to connect to the mobile telephone.
Cannot send images to mobile telephone
l
Please use the appropriate transfer method, according to the profiles supported by your mobile
telephone.
If OPP is supported: right-click on a file to send it
If BIP is supported: use "Image transfer" under Bluetooth Information Exchanger to send images
Cannot connect to the Internet
l
The telephone number of the connection (i.e., the telephone number for the access point
of your Internet service provider) may not be correct. Please check the telephone number.
l
The user ID and/or password for the provider with whom you have signed up may have been
entered incorrectly. Please check the user ID and password.
l
The default connection may have been configured with different settings. Please set the connection
configured for mobile telephone use as the default connection.
Cannot send or receive faxes
l
Once you have registered a mobile telephone as your fax server, you will need to enter the fax
settings from the [Printer and Faxes] window in the Control Panel.
Please refer to "Using a modem station for fax transmissions" for information on the configuration
procedure.
l
The telephone number of the fax destination may have been entered incorrectly.
Please check the telephone number.
l
If the setting under COM Auto Connect Settings
has been set to "Off", a connection
will not automatically be established with the modem. Please connect to the mobile
telephone manually.
l
The fax service may not have been enabled for sending (or receiving). Please check the settings by
following the procedure below.
1. Open [Printers and Faxes] from the Control Panel, right-click on the [Fax] icon, and
then click on [Properties]
The [Fax properties] window will appear.
2. Select the [Device] tab, right-click on the modem you wish to use, and then click on
[Properties]
3. Select the [Send] tab, and then confirm that "Enable device to send" has been checked.
4. Select the [Receive] tab, and then confirm that "Enable device to receive" has been
checked when you wish to receive faxes)
5. Click on the [OK] button
