Trust BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER Software User'S Manual Download Page 46

Page: 46 / 93

Using a wireless keyboard

[HID]

This section describes how to connect a Bluetooth

wireless technology-compatible keyboard to a PC.

Setting up the wireless keyboard

Procedure

1. Right-click on the Bluetooth

wireless technology icon in the task tray, and then click on [Add

New Connection]

Note

Alternatively, click [Start]

→

[All Programs]

→

[Bluetooth]

→

[Bluetooth Settings], and then click on

[New Connection] from the active [Bluetooth Settings] window.

The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window will
appear.

2. Confirm that [Express Mode] has been selected, and then click on the [Next] button

The [Add New Connection Wizard (Searching for devices)] window will appear. Once the program has

finished searching for the devices, the [Add New Connection

Wizard (Device Selection)] window will

appear.

3. Select the device name of the keyboard from [Device List], and then click on the [Next]

button

The [Add New Connection Wizard (Searching for Services)] window will appear.

4. Use the wireless keyboard to enter the numbers that appear in [Bluetooth Passkey (PIN Code)],

and then hit the [Enter] key

Once the program has detected the services successfully, connection to the device and registration of
settings information will be performed automatically.

The settings information will be registered, and an icon will appear in the [Bluetooth Settings] window.

Note

Pressing any key on the wireless keyboard will automatically connect it to the PC thereafter.

Please connect manually if automatic connection is unsuccessful.

Summary of Contents for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER






























































































Search results

Summary of Contents for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Reviews:

Related manuals for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Brands by name

Popular brands

Trust BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER, Software User'S Manual

Search results

Summary of Contents for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Reviews:

Related manuals for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Brands by name

Popular brands