Receiving a fax
This section describes what to do when a fax arrives after you have established a connection to
a modem station.
Important
l
The Fax service must be enabled for receiving in order for you to receive a fax.
Please refer to "
Using a wireless modem station
" under "Troubleshooting" for information on how to
change the send and receive settings once the fax service has been configured.
l
Please ensure you have connected to a modem station before you receive a fax (the device will be
connected to the modem if "Enable Receive" has been selected or
COM Auto Connect
has been
activated).
Procedure
1. When a fax arrives, the Fax Monitor will start automatically as the fax is received
Once the fax has been received, the Fax Monitor will revert to standby mode.
Note
If you have enabled manual fax reception, a message will appear in the task tray. Click on the message
with your mouse to receive the fax.
2. Double-click on the [Fax] icon in the Control Panel
The [Fax Console] window will appear.
3. In the [Fax Console] window, double-click on the fax that has arrived
An image of the received fax will be displayed.
