6.1 Case 1: COM port and modem registration process will be automatically performed
The COM port and modem registration process will then be automatically performed.
Once the COM port and modem (standard 33600 bps type) registration is complete, the
[Add New Connection Wizard (Setting Connection Name)] screen will appear.
6.2 Case 2: COM port and modem registration process will be manually performed
The COM port and modem registration process will then be manually performed using
the original modem .inf file.
Once the COM port and modem registration is completed by following the wizard
process, the [Add New Connection Wizard (Setting Connection Name)] screen will
appear.
7. Configure the type and name of the icon to appear after registration, and click on the
[Next] button.
Please click only on the [Next] button once you are satisfied with the configuration. The [Add New
Connection Wizard (Completing the Add New Connection Wizard)] screen will appear.
8. Click on the [Finish] button
The settings will be registered, and the icon will appear on the [Bluetooth Settings] screen.
Setting fax information
Configure send/receive settings and register fax information.
Procedure
1. Select [Start]
→
[Control Panel], and then double-click on the [Printers and Other Hardware] icon
Note
If the control panel is displayed in "Classic view", and you use Windows 2000, please start from Step (2).
2. Double-click on the [Printers and Faxes] icon
The [Printers & Faxes] window will appear.
3. Click on "Set up faxing" in the [Printers and Faxes] window
A window showing installed programs will appear, and a Fax icon will have been created in the [Printers
and Faxes] screen.
4. Click on "Send a fax" under "Printer Tasks" on the left side of the window
If you have not yet configured a fax device, the [Fax Configuration Wizard] window will appear. In the
window you can enter settings pertaining to the sender (yourself).
Note
If the fax configuration information has already been registered, the [Send Fax Wizard] window, which
can be viewed under "
Sending a fax
" below, will appear instead of the [Fax Configuration Wizard]
window.
5. Enter the sender information, and click on the [Next] button
Note
The sender information that you configure here will be automatically appended as header information
when you send a fax.
The [Fax Configuration Wizard (Select Device for Sending or Receiving Faxes)] window will appear.
6. Select a device to be used for fax transmissions, enable the device for sending or
receiving, and then
click on the [Next] button
Note
If [Enable Receive] is selected, the device will be on standby for receiving faxes even if it is not sending
or receiving anything, and therefore will be in continuous connection to the wireless modem
（
when
COM Auto Connect
is on).
