Trust BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER Software User'S Manual Download Page 48

Page: 48 / 93

Exchanging files with a PC or PDA

[FTP]

You can send and receive files other than business card data with a PC or PDA that has onboard
Bluetooth

wireless technology.

Use "File transfer" in the Bluetooth Information Exchanger to exchange files.

Note

The same operations will be valid as long as the PC and PDA support the FTP profile.

"File transfer" cannot be used to send or receive business card data. Please instead use "Object Push" to

perform these activities.

Procedure

■

Sending files to a PC or PDA (using icons)

1. Turn on the PC or PDA

2. Open Bluetooth Information Exchanger

Note

Please refer to Contents of the Bluetooth

Utility

on how to open Bluetooth Information Exchanger

3. Double-click on the [File transfer] icon

A list of devices will appear in the [File transfer] window.

Note

If the desired device does not appear in the list, please confirm that the device has been turned on, and
then select [Bluetooth]

→

[Search Devices].

A device search will be performed.

You can also use "Image transfer" when sending individual image files.

4. Use the mouse to drag and drop the file you wish to send over the destination icon

Note

When using "File transfer", you can send individual files as well as entire folders.

5. Confirm that the file is being sent

The file will be sent to the PC.

Note

When sending files using "File transfer", a message requesting permission to receive the files may
appear on the destination (receiving) device. The content of the message will vary with the software

that supports the Bluetooth

wireless technology function on the destination device, so please be

sure to follow the instructions provided.

If you are using the Bluetooth

Utility, a message will appear.

If the file has been sent successfully, a message will appear. Please click on the [OK] button.

A message will appear if the file transmission was unsuccessful.
Please click on the [OK] button to close the message, and repeat the procedure.

Summary of Contents for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER






























































































Search results

Summary of Contents for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Reviews:

Related manuals for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Brands by name

Popular brands

Trust BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER, Software User'S Manual

Search results

Summary of Contents for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Reviews:

Related manuals for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Brands by name

Popular brands