Trust BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER Software User'S Manual Download Page 63 | Manualshive

Page: 63 / 93

background image

Using a headset to communicate

[HSP]

This section provides a description of how to use a Bluetooth

TM

wireless technology-compatible wireless

headset to communicate (chat) using Microsoft NetMeeting or other software.

Registering the headset Procedure

Procedure

1. Right-click on the Bluetooth

TM

wireless technology icon in the tasktray, then click on [Add New

Connection Wizard]

Note

Alternatively, you can click on [Start]>[All Programs]>[Bluetooth]>[Bluetooth Settings], then click on
[New Connection] in the [Bluetooth Settings] screen that has opened.

The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] screen will appear.

2. Turn the headset power on

Once you have turned on the headset, set the mode to enable a connection. Important

The procedure for operating the headset may differ depending on the manufacturer and model.
Please consult your user guide for a detailed description of how to operate the unit.

3. Confirm that [Express Mode] has been selected, then click on the [Next] button

The [Add New Connection Wizard (Searching for Devices)] screen will appear.

Once the device search has been completed, the [Add New Connection Wizard (Select a Device)] screen
will appear.

4. Select the name of the headset device from the list, then click on the [Next] button

5. Answering with the headset

If the service has been properly detected, a screen will appear indicating that the headset is being called, and
a tone will accordingly sound in the headset.

Please press the headset switch.

Important

The procedure for operating the headset may differ depending on the manufacturer and model.
Please consult your user guide for a detailed description of how to operate the unit.

The [Add New Connection Wizard (Configuring (Connecting to Voice Circuit))] screen will appear, and
device configuration will be performed.

Note

If you are connecting to the headset for the first time, or if another audio device has not yet been registered,
the following [Found New Hardware Wizard] screen will appear, from which you can proceed to install the
driver.

If another audio device has already been registered (i.e., the driver has been installed), you can proceed to
Step 9 without having to install the driver.

6. Click on the [Next] button

The [Install Hardware] screen will appear.

«
...
61
62
63
64
65
...
»

Summary of Contents for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER






























































































Reviews:

No comments

Related manuals for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Brand: Linksys Pages: 343

Brand: National Instruments Pages: 19

Brand: ASIX Pages: 16

Dual Port 25 Gb

Brand: Oracle Pages: 88

Brand: Inteltronic Pages: 1

Brand: Dell Pages: 278

Brand: Belkin Pages: 52

Brand: Asante Pages: 74

Brand: Tenda Pages: 18

Brand: Sun Microsystems Pages: 40

Brand: Crucial Pages: 25

Brand: Compaq Pages: 22

SmartMedia (SM) Card/Adapter

Brand: SimpleTech Pages: 7

NOXON WLAN Stick

Brand: TerraTec Pages: 26

Brand: TRENDnet Pages: 2

Brand: TRENDnet Pages: 2

Brand: Flomec Pages: 20

Brand: Gefen Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands