Please check the profile being used on the other device.
l
The following profiles are compatible with [Bluetooth Settings].
DUN, FAX, LAP, SPP, HID, HCRP, FTP, OPP, HSP, PAN and BIP
Devices running profiles other than those above will not be able to be registered with
[Bluetooth Settings].
Bluetooth Information Exchanger
An error occurs when you try to send a file using the right-click menu.
l
Select and right-click on a file, and then you can choose either the FTP or OPP profile to use
when you click on [Send to Bluetooth Device].
If neither profile is supported by the destination device, the file will not be able to be sent from
the right-click menu.
The transmission will also fail if you use FTP to send a file to a device that only supports the OPP
profile.
Should this occur, please click on [Bluetooth]->[Options]-[Bluetooth Information Exchanger]tab-
>[Advanced]->[Preferred Profile] tab to configure the Transfer mode.
Cannot open shared folder on remote device using [File Transfer].
l
The other device may have a certain security level enforced (Non-connectable mode etc). Please
confirm the security settings of the other device. Please enter the correct password if you are
asked to enter one.
Remote Camera
l
See "Using a camera"
Bluetooth Local COM
Cannot add port
l
A maximum of 64 virtual COM ports can be added. You will be unable to add another port if 64
ports have already been configured.
Using a wireless modem station
Modem station cannot be detected
l
If the modem station is connected to and is being used by another device, the modem station will be
undetectable even if you search for it.
Cannot connect to modem station
l
If the modem station is connected to and is being used by another device, no other device will be
able to connect to the modem station.
Bluetooth passkey entry failed
l
The Bluetooth passkey (PIN code) comprises a sequence of alphanumeric characters, with the
letters able to be rendered in upper and lower case.
If [Caps Lock] is on, the Bluetooth passkey may not be able to be entered correctly.
Cannot connect to telephone line
l
Please ensure that the telephone cable is connected from the socket to the "LINE" terminal on the
modem station.
Note
If the telephone cable has come loose because it has not been fully inserted into the socket, the
resulting poor contact may prevent data from being transmitted accurately.
Communication will be impossible if the interior of the cable has been broken. Please replace the
cable with another one.
l
Please ensure that the two slide switches on the underside of the main unit have been set to the
"NORMAL" and "MODEM" positions respectively.
