Connecting to the Internet using a modem station
[DUN]
You can use a Bluetooth
TM
wireless modem to connect to the Internet via a telephone line.
Important
l
In order to connect to the Internet, you must have already signed up with a provider and obtained a
connection ID and password. Please ensure you have confirmed the ID, password and telephone
number of your provider's access point before you begin the set-up process.
l
Please refer to your instruction manual for information on connecting the modem station to a
telephone line.
l
A Bluetooth passkey (PIN code) is required for you to connect to the modem station. Please
make a note of your Bluetooth passkey before you start the set-up process.
Setting up the modem station
Procedure
1. Turn on the wireless modem station
2. Right-click the Bluetooth
TM
wireless technology icon in the task tray, and then click on
[Add New Connection]
Note
Alternatively, click [Start]
→
[All Programs]
→
[Bluetooth]
→
[Bluetooth Settings], and then click
on [New Connection] from the active [Bluetooth Settings] window.
The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window will
appear.
3. Confirm that [Express Mode] has been selected, and then click on the [Next] button.
The [Add New Connection Wizard (Searching for devices)] window will appear.
4. Select the device name of the wireless modem station from [Device List], and then click on
the [Next] button.
The [Add New Connection Wizard (Searching for Services)] window will appear.
Once a service has been detected successfully, connection to the device and COM port
creation will be performed automatically, after which the [Add New Connection Wizard
(Modem Settings)] window will appear.
5. If you are connecting to a wireless modem station for the first time, enter the passkey for the
modem station under [Bluetooth Passkey (PIN code)], and then click on the [OK] button.
Once the program has finished searching for the devices, the [Add New Connection
Wizard (Device Selection)] window will appear.
6. Click on the [Next] button
Certain modems require you to configure initialization commands separately.
Please click on the [Additional initialization Command Settings] button, enter the initialization
commands, and then click on the [OK] button.
