Trust BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER Software User'S Manual Download Page 6

Page: 6 / 93

4. Select the mouse device name from [Device List] and click on the [Next] button.

Searching for services will start.

Note

If several services (profiles) are supported by the device, the service that has been set

to the highest priority shall be automatically selected and set up in Express Mode.

Please use Custom Mode if you wish to select desired services manually.

When a service has been detected, a window prompting you to enter the Bluetooth passkey

(PIN code) may appear. Please enter the passkey and click on the [OK] button.

Please refer to your device instruction manual for information on which passkey to use.

Summary of Contents for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER






























































































Search results

Summary of Contents for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Reviews:

Related manuals for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Brands by name

Popular brands

Trust BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER, Software User'S Manual

Search results

Summary of Contents for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Reviews:

Related manuals for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Brands by name

Popular brands