Trust BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER Software User'S Manual Download Page 50

Page: 50 / 93

If the file has been received successfully, a message will appear. Please click on the [OK] button.

A message will appear if the file transmission was unsuccessful. Please click on the [OK] button to
close the message, and repeat the procedure.

Note

The received file will be saved in the "Shared folder" under "File transfer" in the Bluetooth
Information Exchanger

You can use the Settings on

[Bluetooth Information Exchanger]

tab in [Options] to specify the

location of the "Shared folder" on the hard drive.

Summary of Contents for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER






























































































Search results

Summary of Contents for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Reviews:

Related manuals for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Brands by name

Popular brands

Trust BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER, Software User'S Manual

Search results

Summary of Contents for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Reviews:

Related manuals for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Brands by name

Popular brands