Listening to music or other audio files
1.
Playing music or other audio files on your PC
Important
Please confirm the points below if you are unable to hear anything despite having properly connected
the stereo headphones.
Click [Start]
→
[All Programs]
→
[Accessories]
→
[Entertainment]
→
[Volume Control].
Remove the tick next to [Mute] if it has been ticked. If the volume is at its lowest setting, please
adjust it to an appropriate level.
Music playback may be interrupted if other Bluetooth
TM
wireless technology devices are currently
connected to your PC. When you are listening to music, it is recommended that the stereo headphones
be the only connected device.
Music playback may be interrupted if you are some distance away from the PC, or if there are any
obstructions between you and the PC.
If you are unable to hear any sound out of your stereo headphones while music or audio is currently
playing in a related application, please stop the files being played, open [Sounds and Audio Devices]
from the Control Panel, and change the default device to "Toshiba Bluetooth Wave."
If you are still unable to hear any sound from the stereo headphones even after having set "Toshiba
Bluetooth Wave" as the default device, please re-launch the application.
2.
Finishing listening to music and disconnecting
1.
Right-click on the icon for the currently connected mode from [Bluetooth
Settings] on your
PC, and click on "Disconnect."
A message confirming the disconnection may appear.
2.
Click on the "Yes" button after having followed the instructions in the message.
The icon will indicate that the device has been disconnected.
Important
Please close the following audio applications before you disconnect the stereo headphones from
your PC:
n
Music/video playback applications
n
e-Conferencing applications
n
Voice-recognition applications
Please completely disconnect the stereo headphones before launching any of these applications.
Please refer to the user guide for information on terminating a connection from the stereo
headphones.
Playing music using remote control
Music applications and video playback applications installed on your PC(e.g.,"Windows Media Player 9"
and "InterVideo WinDVD") may be operated with the remote control button/switch on your stereo
headphones.
The remote control used with the stereo headphones must be compliant with the Bluetooth
TM
wireless
technology AVRCP profile. Please refer to the headphones user guide for further information.
You can configure the application to be operated using the switch/button according to the following
procedure.
Procedure
1.
Double-click on the Bluetooth
TM
wireless technology icon in the taskbar
Launches "Bluetooth Settings."
2.
Right-Click the Bluetooth(TM) Wireless Technology icon and Click on
[Options]->[Other] Tab
->[Av Player] in [AV player section]
The [Select AV Player] screen will appear.
3.
Select the application, and click on the [OK] button
The functions and switch/button that can be operated may differ depending on the application used for
music/video playback as well as the version.
