Connecting to a LAN using an access point (LAP)
[LAP]
This section describes how to connect to a network (for example, a company LAN or a personal home
network) using a LAP profile-compatible access point.
Please refer to
Using an access point (PAN) to connect to a LAN
if you are using a PAN profile-
compatible access point.
Important
l
The access point must have been started and a normal connection already established to the network
before the access point is set up. Please refer to the access point instruction manual for information on
how to set up the access point.
l
A Bluetooth passkey (PIN code) is required for you to connect to the access point. Please make a note of
your Bluetooth passkey before you start the set-up process.
Setting up the access point
Procedure
1. Turn on the access point, and confirm that a connection has been established with the network
2. Right-click the Bluetooth
TM
wireless technology icon in the task tray, and then click on
[Add New Connection]
Note
Alternatively, click [Start]
→
[All Programs]
→
[Bluetooth]
→
[Bluetooth Settings], and then click on
[New Connection] from the active [Bluetooth Settings] window.
The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window will
appear.
3. Confirm that [Express Mode] has been selected, and then click on the [Next] button
The [Add New Connection Wizard (Searching for devices)] window will appear.
Once the program has finished searching for the devices, the [Add New Connection Wizard (Device
Selection)] window will appear.
4. Select the device name of the access point from [Device List], and then click on the
[Next]
button
The [Add New Connection Wizard (Searching for Services)] window will appear.
You will be asked for the Bluetooth passkey in the window that appears.
5. Enter the passkey under [Bluetooth Passkey (PIN code)], and then click on the [OK]
button
Service detection and COM port creation will be performed automatically.
The [Add New Connection Wizard (Create Connection Destination)] window will appear.
