Trust BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER Software User'S Manual Download Page 55 | Manualshive

Page: 55 / 93

background image

Exchanging business card data with a PC or PDA

[OPP]

You can exchange business card data with a Bluetooth

TM

wireless technology-enabled PC or PDA.

Business card data are exchanged using "Object Push" under Bluetooth Information Exchanger.

Note

l

Data compliant with the "vCARD" standard are the only type of business card data able to be sent and
received with "Object Push".

Business card data can be used by applications such as Microsoft Outlook.

l

Business card data can be created in vCARD format by Microsoft Outlook and other similar applications.

l

You can send business card data directly from Microsoft Outlook.

l

The OPP profile must be supported by the PC or PDA of the other party.

Procedure

■

Selecting a business card and sending it to a PC or PDA (using icons)

Select a business card you wish to send from among all the business card data you have already received
through exchanges with your business or other contacts, and then send it to another party.

1. Turn on the PC or PDA

Confirm that a Bluetooth

TM

wireless technology connection has been enabled before proceeding.

2. Open Bluetooth Information Exchanger

Note

Please refer to Contents of the Bluetooth

TM

Utility

on how to open Bluetooth Information Exchanger

3. Double-click on the [Object Push] icon

A list of devices will appear in the [Object Push] window.

Note

If the desired device does not appear in the list, please confirm that the device has been turned on, and
then select [Bluetooth]

→

[Search Devices].

A device search will be performed.

4. Use the mouse to drag and drop the business card you wish to send over the destination icon

The business card will be sent.

Note

When you try to send a business card, a message requesting permission to receive the card may
appear on the device belonging to the other party (i.e., on the receiving end). The content of the
message will vary with the software installed on the destination device, so please be sure to follow the
instructions provided.

If the business card has been sent successfully, a message will appear. Please click on the [OK] button.

A message will appear if the business card transmission was unsuccessful.
Please click on the [OK] button to close the message, and repeat the procedure.

Memo

Data that have been sent will be saved in a folder for exchanged business cards on the destination
device.
You can configure an associated application (Microsoft Outlook etc) to start automatically when you
have received a business card, allowing you to view the card details.

«
...
53
54
55
56
57
...
»

Summary of Contents for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER






























































































Reviews:

No comments

Related manuals for BT-2100P BLUETOOTH 2.0 EDR USB ADAPTER

Token-Ring Network PC Adapter

Brand: IBM Pages: 118

Freedom SW 2000

Brand: Xantrex Pages: 36

CrossPower C4L5200-ETH

Brand: C4Line Pages: 26

Brand: Bose Pages: 2

Brand: SENAO Pages: 25

Brand: HIKOKI Pages: 100

Brand: Diamond Multimedia Pages: 14

Brand: Sveon Pages: 19

Lifestyle 525 Series II Home Theater

Brand: Bose Pages: 67

Brand: Black Box Pages: 2

Brand: Lindy Pages: 16

Brand: GearMo Pages: 6

isysNet ControlNet A Series

Brand: Parker Pages: 8

Brand: Epson Pages: 19

Brand: Epson Pages: 36

Brand: Epson Pages: 19

Brand: Epson Pages: 56

C200001 - Stylus Color 660 Inkjet Printer

Brand: Epson Pages: 67

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands