Technical Data
Instruction manual Operating table TruSystem 7000 – 1 730 263 – 11/2016
97
If the operating table is not in use for an extended period or taken
out of service, the batteries should be recharged periodically to
preserve the battery service life. A charging interval of 1 month is
recommended.
24.2
Operating table
Date of manufacture
Refer to the nameplate on the product
Table top length
(from one coupling point to
the next)
Two-part table top
49.1" (1248 mm)
One-part table top
33.2" (843 mm)
Table top width
(with side rails)
23.6" (600 m)
Operating table height
(without pad)
23" to 45" (59 cm to 114 cm) (tolerance ±0.4" (±1 cm))
Speed
2 cm/s
Pad dimensions
(length x width x height)
Two-part table top
45" x 21.5" x 3.6"
((1143 x 545 x 90) mm)
One-part table top
29.5" x 21.5" x 3.6"
((748 x 545 x 90) mm)
Weight
Two-part table top
551 lbs (250 kg)
One-part table top
507 lbs (230 kg)
Maximum table top load 1000 lbs (450 kg) (depending on the operating table
equipment and the patient weight)
Side rail load capacity
Longitudinal axis
Each 73.8 lbf·ft (100 Nm)
Transverse axis
Each 110.6 lbf·ft (150 Nm)
Internal power supply
I. P. S, 2 batteries, 40.7 V/4.8 Ah
External power supply
100 V–230V
~
, 50Hz/60Hz
240 V
~
, 50 Hz
Power consumption
max. 700 VA
Power plug
Typical for the country, 3.3 yd (3 m) connection cable
Radio transmission (only for
operating table version
MBW)
Frequency band for
transmission
2.405 GHz to 2.480 GHz
Modulation type
O-QPSK (Offset Quadrature
Phase Shift Keying)
HF-Bandwidth
2 MHz (IEEE 802.15.4)
Output power (Watt EIRP) 0.000603
Emission designation
1M67G1D