Configuration
86
Instruction manual Operating table TruSystem 7000 – 1 730 263 – 11/2016
20
Configuration
The following settings can be configured on the operating table via
an Ethernet connection from the PC to the operating table and using
the Trumpf Medical Software Service Interface:
1. Stop at zero crossing (activated as default for all functions);
All electrical adjustment functions of the operating table stop
automatically when the level position is reached. For
additional adjustment beyond level position, briefly release the
function key and press it again.
2. Restricted leveling (not activated by default):
This function allows the user to adjust the Level position
function. In particular, the automatic leveling of the motorized
table section joints can be prevented.
3. Intermediate stop during tilting, Trendelenburg, and
longitudinal travel (not activated by default):
In addition to the general level position, interim stops can be
set for the Tilting, Trendelenburg and Longitudinal travel
functions. The respective function stops automatically upon
reaching the newly set position. For any further adjustment,
briefly release the function key and then press it again. For
safety reasons, the intermediate stop of the tilt function cannot
be deactivated (the intermediate stop can be at an inclination
angle from 5° to 15°).
4. Signal tone volume:
This function allows the volume of the signal tones on the
operating table to be individually adjusted.
5. Speed, drive unit:
This function enables individual adjustment of the speed of the
drive unit for the operating table version MB/MBW.
6. Activation of all table top and column functions (by default, all
movements are locked when freewheeling or with running
gear assistance):
By releasing all table top and column movements on the
operating table, all operating table functions are executed
even when the operating table is free to move (operating table
not jacked up – freewheel or running gear assistance active).
The required option must be set by Trumpf Medical Technical
Customer Service or the responsible on-site hospital technician.