manualshive.com logo in svg

Trumpf 1604786, Instruction Manual, Page: 12 / 110

Share
Download
Trumpf 1604786 Instruction Manual Download Page 12

Safety

12

Instruction manual Operating table TruSystem 7000 – 1 730 263 – 11/2016

 CAUTION!

Risk of personal injury. Hazard to the patient due to improper 

attachment!

Check that the section segments and accessories are securely 

fastened to the operating table before each use. Spontaneous 

movement may occur and loose elements may slip out!

Loosen control units for adjustment purposes only. Clamp them 

down immediately thereafter! Always check that fastening 

elements are secured properly.

 CAUTION!

Risk of personal injury.

• Risk of crushing by moving parts! Familiarize yourself with its 

operating functions before using the product!

• Risk of injury due to overhanging parts. Maintain proper 

distance.

 CAUTION!

Risk of personal injury. Hazard to the patient due to damaged 

product.

Check that all electrical and mechanical functions/parts of the 

operating table, including accessories, are undamaged and in 

good working order before start-up.

Defective or damaged products may not be used!

NOTE

 

The manufacturer will not be held liable if
• additional components or other accessories that do not meet 

the manufacturer's specifications are installed or used with this 

product,

• installed safety equipment is removed.

Summary of Contents for 1604786















































































































Reviews:

No comments